To print a Rack Configuration from a CISC AS/400:

1. Go to an AS/400 Command line.
2. Type WRKHDWPRD press <enter>
3. Choose Option 1 (Work with Rack Configuration)
4. Press Command 17 (Print Rack Configuration)

1. Go to AS/400 Command line
2. Type STRSST press <enter>
3. Choose Option 1 (Start a Service Tool)
4. Choose Option 7 (Hardware Service Manager)
5. Press Command 6 or F6 (Print Configuration)

Display the IPL type and mode by doing the following:

1. On the System Control Panel, press the Up or Down select push button until "01" appears in the Function/Data display.
2. Press <enter>
3. Did a "B M" appear in the Function/Data display?
   • If yes, go to Step 10.
   • If no, do the following:
4. Press the Up or Down select push button until "02" appears in the Function/Data display.
5. Press the <enter> push button.
6. Press the Up or Down select push button until "B M" appears in the Function/Data Display.
7. Press the <enter> push button.
8. Press the Up or Down select push button until "01" appears in the Function/Data Display.
9. Press the <enter> push button. The "B M" should now appear in the Function/Data Display.

   Continue with Step 10

10. Press "System Request" on the system console.
11. Type DST (in upper case) on the prompt line.
12. Press <enter>

    The Dedicated Service Tool sign-on screen appears

13. Type the DST user ID and password for your system. (The default value for both the User ID and password is 22222222).
14. Press <enter>
15. When the "Dedicated Service Tools" screen is displayed, choose Option 7 (Start a Service Tool).
16. Press <enter>
17. Choose Option 4 (Hardware Service Manager).
18. Press <enter>
19. Press Command 6 or F6 (print Rack Configuration).